Skip to content

GHS hazard class · Physical hazards

Substances and mixtures which in contact with water, emit flammable gases

Substances and mixtures which, in contact with water, emit flammable gases are solids or liquids that react with water to give off a flammable gas, sometimes in dangerous quantities or with enough heat to ignite it.

What it means

Contact with water, damp air or moisture can release flammable gas that may ignite spontaneously. Using water to fight a fire involving the material can make it worse.

What to do

Keep dry and in tightly closed containers, protect from moisture, do not use water to extinguish a fire unless the SDS says it is safe, and use only the extinguishing agents the SDS lists.

This is general guidance for the class. Your product's safety data sheet takes precedence.

Categories and hazard statements

CodeCategoryStatementPictogramSignal word
H260Category 1In contact with water releases flammable gases which may ignite spontaneouslyGHS02Danger
H261Category 2In contact with water releases flammable gasGHS02Danger
H261Category 3In contact with water releases flammable gasGHS02Warning

Chemicals with substances and mixtures which in contact with water, emit flammable gases hazard codes

Chemicals in our database whose primary classification includes any current Substances and mixtures which in contact with water, emit flammable gases code (H260, H261).

No chemicals in our database carry these codes yet.

Substances and mixtures which in contact with water, emit flammable gases: frequently asked questions

What is the GHS hazard class "Substances and mixtures which in contact with water, emit flammable gases"?

Substances and mixtures which, in contact with water, emit flammable gases are solids or liquids that react with water to give off a flammable gas, sometimes in dangerous quantities or with enough heat to ignite it.

Which hazard statements belong to Substances and mixtures which in contact with water, emit flammable gases?

The current hazard statements for this class are H260, H261.

Which pictograms and signal words are used for Substances and mixtures which in contact with water, emit flammable gases?

Pictograms: GHS02 (Flame). Signal words: Danger or Warning, depending on the category.

What should I do when working with a substances and mixtures which in contact with water, emit flammable gases hazard?

Keep dry and in tightly closed containers, protect from moisture, do not use water to extinguish a fire unless the SDS says it is safe, and use only the extinguishing agents the SDS lists.

https://pubchem.ncbi.nlm.nih.gov/ghs/ghscode_10.txt (UN GHS Revision 10, retrieved 2026-10-12)